IS10E-20-F01-6L-D
Product number:
IS10E-20-F01-6L-D
Product features
| Assembly type: | für Endmontage |
|---|---|
| Cable length: | 3 m |
| Conductor connection method: | offenes Kabelende |
| Design of control output: | Two-wire |
| Max. set pressure: | 0.6 MPa |
| Min. set pressure: | 0.1 MPa |
| Number of wires: | 2 |
| connection type: | open cable end |
| degree of protection: | IP40 |
| max. ambient temperature: | 60 °C |
| max. medium temperature: | 60 °C |
| max. operating pressure: | 7 bar |
| max. operating voltage with AC 50 Hz: | 100 V |
| max. operating voltage with DC: | 24 V |
| measurement principle: | mechanic measuring |
| min. ambient temperature: | -5 °C |
| min. medium temperature: | -5 °C |
| min. operational pressure: | 1 bar |
| number of switch outputs: | 1 |
| operating medium: | compressed air |
| pneumatic port: | G 1/8 |
| switching element function: | Normally open contact (NO) |
| type of indication: | analogue, bars |
Product information "IS10E-20-F01-6L-D"
The IS10E-D combines a pressure switch with a piping adapter for direct connection to modular FRL units. This integration simplifies installation and ensures pressure detection at the connection point. It facilitates efficient system monitoring without complex plumbing.
• Integrated pressure switch and adapter
• Modular connection
• Simplified piping
• Reliable switch performance
• Integrated pressure switch and adapter
• Modular connection
• Simplified piping
• Reliable switch performance
Report an error
Thank you for helping us improve our website. Please provide as much detail as possible regarding item IS10E-20-F01-6L-D, IS10E-20-F01-6L-D.